MIST LUBRICATION SYSTEM

The OIL MIST LUBRICATION SYSTEM is uniquely intended to adapt to the prerequisite where oilling is to be provided as Fog/mist. It is accessible both on discontinuous/consistent release. The Oil Mist Lubricator is best appropriate for Conveyors, Sliding chains, Spindles, Stripes, Drives of Power Presses and Shearing Machines, Textile Machines and so forth. The Oil Mist Lubricator comprises with a foreign made acrylic repository which is joined with a solitary or multi outlet square. The oil square is principally a metering hinder in which oil release compares to stroke of little cylinders gave inside the block.The cylinders which are of spring return type moves with the pressurized air associated with air channel purpose of the square. With the development of cylinders, oil is sucked from the repository and the sucked amount is controlled/balanced by changing stroke of cylinder by an altering screw. The framework is a mix of an acrylic supply tank, Vertical buoy switch, Oil Block, Air Regulator, Solenoid Valve, FRL Unit, Nozzle for Mist, Timer (for intermittent).Four nos. mounting sections are given on the back mass of Mist unit to mount the unit on to any vertical surface The frameworks are recommended to introduce at some helpful place ideally closer to the oil points.The mounting measurement are given in the illustration. For the most part 4mm and 10mm Nylon Tube is required to interface from square with the grease point.